Deeper Insight Into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetry and GC-MS, Part 1

BeFlat^® – What Is It?

Benefit of the Strain-Controlled Mode for the Investigation of Rubber Compounds Using High-Force DMTA

Comparison of Tensile and Bending Tests on a Layered Composite Material

How Does My Powder Flow? In One Minute to the Result with the Kinexus Rotational Rheometer

About the Rheology of Egg Liqueur

Thermal Diffusivity of Metals as a Function of Grain Size

About the Thermal Stability of Glycerol - Investigation of High-Boiling Organics by TGA-FT-IR

Material Testing Beyond the Linear Visco-Elastic Range: Tensile Testing in the DMA GABO Eplexor^®

Thermal Expansion of Porous Metal Foams

From Low to High Shear Rates: NETZSCH Reaches Them All

Parchment Paper and Silicone Baking Mat – Are They Safe to Use?

Fulfulling the FDA’s Rheology Testing Requirements for Abbreviated New Drug Applications (ANDA) for Topical Creams

Polymer Rheology and Molecular Mass

Testing the Accuracy of the GHP 456 and HFM 446 with the New ERM-FC440 Reference Material

Thermal Characterization of Porous Concrete - Influence of Density on Thermal Conductivity Using the Heat-Flow Meter and Guarded Hot Plate Method

How to Apply the Cox-Merz Rule: A Step-by-Step Guide

About the Influence of the Particle Size on the Thermal Behavior of Inorganic Powders

Detecting Weak Thermal Effects by Means of Differential Scanning Calorimetry

NETZSCH Tools to Identify and Quantify Different Plastic Compositions in the Recycling Stream

The Right Choice – Comparison of Tension, Bending and Dual Cantilever Measuring Modes in the DMA Using PE as an Example

Creep Recovery Tests for Elastomer Seals? The DMA GABO Eplexor^® 2000 N Delivers the Response

Measurement on an Unstable, Viscous Liquid by Means of a Relative Geometry – Wall Paint

Winter and Summer Tires or Rather All-Season Tires? The GABO Eplexor^® 500 N Will Answer that Question!

About the Efficiency of Charging and Discharging Processes in Lithium-Ion Accumulators - Investigations with the Coin Cell Module of the MMC 274 Nexus^®

Time-Temperature Superposition on Asphalt Binder

Optimizing Dehydration Processes of Pharmaceuticals with NETZSCH Kinetics Neo

Venting – Or How to Regain Control of a Reactor in Cases Where “Thermal Runaway“ Has Already Started

Saving Energy and Time with the New HFM 446 Lambda Eco-Line

Kinetic Analysis of the Shear Viscosity to Predict the Curing Behavior of a 2-Part Epoxy Adhesive

TCC 918 – Improved Flame Retardants for Safe Cable and Wire Sheathing

How to Measure Thin Insulation Samples with the HFM

Studying Curing Behavior of Nail Gels Using Rheology

Why Does It Makes Sense to Determine the Thermal Conductivity of Elastomers Using the LFA 467 HyperFlash^®?

How Will My Asphalt Binder or Bitumen Behave in the Future? Prediction by Means of Time-Temperature-Superposition

Why Do You Hit the End of Your Ketchup Bottle? Yield Stress Analysis

DSC and Rotational Rheometry: Two Complementary Techniques

Complete Thermal Characterization of PTFE – The Combination of DSC, DMA and Rotational Rheometry

Thermal Characterization of Silicone

Precise Determination of the Specific Heat Capacity in a Wide Temperature Range by Means of DSC

Deeper Insight into the Pyrolysis of Acetysalicylic Acid by Means of Thermogravimetry and Mass Spectrometry, Part 4

Deeper Insight into the Pyrolysis of Acetylsalicylic Acid by Means of Kinetic Analysis, Part 2

Influence of the Cooling Rate on the Thermal Behavior of PET

Mouth-Nose-Protection Materials Under the Influence of Humidity

High-Speed Furnace

Gummy Bears – Colorful, Temperamental and Demanding in Their Dynamic-Mechanical Properties

How to Obtain Shear Viscosity of a Polymer Melt with an Oscillation Measurement: The Cox-Merz Rule

Evaluating the Polymer Ratio in a PET/PC Blend by Means of Modulated DSC

How to Measure Viscosity Despite Sedimentation: Twin Dispersion Paddle

Hydrogen Emission from Zircaloy BRC-276 unter Water Vapor at Higher Temperatures

TG-GC-MS Measurements on Acetylsalicylic Acid (ASA)

PbTe – A Thermoelectric Material Heat Capacity and Thermal Conductivity

Liquid Metals – Cast Iron

A New Sample Holder for Low-Viscosity Liquids Part 1 – Principle and Test Results of Water

A New Sample Holder for Low-Viscosity Liquids Part 2 – Test Results on an Epoxy Resin During Curing

TGA-GC-MS Measurements on Pinewood/Sapwood

Melting, Boiling and Vapor Pressure of 3 Polycyclic Aromatic Hydrocarbons

TGA Measurements on Mica

TGA Measurements on Calcium Oxalate Monohydrate

TGA Measurements and c-DTA^® Determination on Polymers

TGA Measurements By Means of the BeFlat^® Correction

TGA Measurements under Vacuum on SEBS

Chocolate

STA Measurements with Steel Furnace

Thermal Characterization of Aerated Concrete by Means of LFA

Thermal Effusivity Measurements on PEDOT: PSS Thin Film by Means of NanoTR

About the Heat Signature of Accumulators During Charging and Discharging

Why Machine Downtime Is Critical when Working with POM

Influence of the Heating Rate on the Glass Transition Temperature of Elastomer Materials for the DMA GABO Eplexor^® Series

Single-Crystalline Quartz Materials as Ideal Substances for Temperature Calibration of the New High-Temperature Eplexor^®

What TMA Measurements Can Tell About the Filler Orientation in Injection Molding

Dehydration Kinetics and Long-Term Predictions for Calcium Hydrogen Phosphate Dihydrate

Identification of Polymers in Blends by Means of TGA FT-IR and the NETZSCH-FT-IR Database of Polymers

Evaluating Product Spreading Characteristics on a Rotational Rheometer Using the Power Law Model

Thermal Stability of Lithium Ion Battery Electrolyte

Investigation of the Oxidative Stability of Polyolefins and Thermoplastic Elastomers by Means of DSC

Novel Sample Preparation Technique for Testing Biological Tissue Via Differential Scanning Calorimetry

Sugar and Its Role in Freeze-Drying Processes − Investigated by Means of DSC

Using Rheology to Study the Hardness and Spreadability of Butter

Using Squeeze Flow to Extend Rheological Measurements for Concentrated Suspensions

PTFE – A Fascinating Polymer Investigated by Advanced Thermal Analysis Techniques

Pressure-dependent Investigation of the Evaporation of Liquids by Means of Differential Scanning Calorimetry (DSC)

How To Detect Residual Caffeine in Decaffeinated Instant Coffee?

Challenging Samples: A Solution to Monitor Curing | Use of the Kinexus Disposable Plate Systems

Rheological Properties of a Lubricating Grease in Accordance with DIN 51810-2

Rheological Properties of Lubricating Grease in Accordance with DIN 51810-1

Expandable Graphite – A Sustainable Solution for Flame Retardants in Plastics

TCC 918 – Avoiding Fire with Toxic Smoke Caused by Electronic Components

About the Calibration of the Coin Cell Module of the MMC 274 Nexus^®®

Easy Determination of the Specific Heat Capacity of Glass Wool by Means of HFM Measurements

LFA 467 HT HyperFlash: Sample Holder for Measurement on Molten Metals

Determining Cure Profile and Post-Cure Shrinkage of Photo-Polymers Using UV Accessory on a Rotational Rheometer

Evaluating Non-Linear Visco-Elastic Effects Using Normal Force Measurements on a Rotational Rheometer – Body Wash

Yield Stress Dependance on Droplet Concentration in Emulsion Systems

Characterizing Opthalmic Viscosurgical Devices (OVDs) Using a Rotational Rheometer

Characterizing Gel Properties Using Oscillation Testing on a Rotational Rheometer

Evaluating Product Texture Using Oscillatory Testing on a Rotational Rheometer

Quantifying Shear Thinning Behavior on a Rotational Rheometer Using the Power Law Model

Characterizing the Microstructure of ´Worm-like Micelles` Using Rheology

Deeper Insight into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetric Measurements in Various Gas Atmospheres, Part 3

Determination of Yield Stress of Complex Fluids by Stress Ramp Test on a Rotational Rheometer – Shower Gels

Determination of Yield Stress of Complex Fluids by Oscillation Tests on a Rotational Rheometer – Various Gel Samples

Determination of Yield Stress of Complex Fluids by Model Fitting Using a Rotational Rheometer – Gel

Assessing the Dispersion Stability Using Creep Testing on a Rotational Rheometer – Shower Gels

Understanding and Minimizing Polycaprolactone Degradation During Processing Using Rheology and Multi-Detector GPC

Terminology in Pharmacy – Thermal Analysis Provides the Overall Picture

Thermal Conductivity of Compressible Specimens – Influence of Particle Size and Density

About the Thermal Behavior of Acetylsalicylic Acid and Aspirin®

Dynamic-Mechanical Analysis of Polycarbonate – Most Adequate Test Procedures for Thermoplastics Using the High-Force DMA Eplexor^® 500 N

Hazard Potential of Decomposition Reactions Using the Example of Hydrogen Peroxide (H2O2)

Monitoring Damage Development of Static Sealing Elements Using the Simultaneous Dynamic Mechanical and Dielectric Analyzer DIPLEXOR

Identification of Polymorphic Forms of Sorbitol

Improving Process Conditions – Determining the Thermal Stability of Eudragit® by Means of TGA-FT-IR

Avoid Caking of Lactose – Apply the NETZSCH TGA

Thermal Stability of Lactose by Means of TGA-FT-IR

How Stable Is Potassium Clavulanate Under an Inert Atmosphere?

Influence of Humidity on the Decomposition of Potassium Clavulanate

Influence of the Heating Rate on the Glass Transition of Lactose

Behavior of Nipagin under Thermal Influence – Investigations by Means of TGA-FT-IR Coupling

Penetration Model in the NETZSCH LFA Software − Porous Materials Finally Handled Properly!

LFA 467 HT HyperFlash: New Sample Holder Dedicated to Liquid Metals

Skutterudite: High-Performance Material for Thermoelectric Applications

Determine the Specific Heat Capacity During an Isothermal Measurement – Use the Temperature-Modulated DSC 214 Polyma

Aspartame: Sweet Wonder or Allowed Poison? Analysis of Aspartame by Means of DSC and TG-FT-IR.

Deeper Insight Into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetry and GC-MS, Part 1

DMA GABO Eplexor^® Series – Shorter Measurement Times Due to Homogeneous Temperature Distribution

Smart Thermal Analysis: Measurements Wanted?

Quantification of Ammonia Release from Polymer Blowing Agents by Means of TGA-FT-IR

Want to Determine the Dynamic-Mechanical Properties of High-Temperature Materials Under Application-Proximate Conditions? Our New High-Temperature Eplexor^® Can Do It!

Thermal Diffusivity of Extremely Thin Polymer Films

Adhesion Behavior of Tire Cords, Measured by Means of DMTA – Temperature Dependence and Stress Limits

SBA 458 Nemesis^® – Broadening of the Acceptable Sample Geometry Range

Determination of the Thermal Diffusivity of a Thin Polymer Film by Conventional LFA Analysis

PCM – Phase Change Materials From the Solid into the Melt Investigation of Thermal Conductivity by Means of the LFA 467 HyperFlash^® and DSC 204 F1 Phoenix^®

NETZSCH Proteus^® for Quality Control

The New SBA 458 Nemesis^® – Measurement of the Seebeck Coefficient on Pure Nickel

Investigation of Alkali Salts with the STA 449 F5 Jupiter^®

Melting Point Effect of High Pressures of CO2 on a Pharmaceutical Compound Demonstrated with HP-DSC

How to Measure Rigid, Higher Thermal Conductivity Samples by Means of HFM

Binder Burnout of Stabilized Zirconia

Highly Corrosion-Resistant Metal Alloy

Why Knowledge About Anisotropy Is Crucial When Designing High-Performance Composite Parts

Power Cables – Transfer of the Real Operating Conditions from the Field into the Laboratory Using the High-Load DMA GABO Eplexor^®

Quantifying Shear Thickening Behavior Using the Power Law Model on a Rotational Rheometer

Overcoming and Quantifying 'Wall Slip' in Measurements Made on a Rotational Rheometer

Quantifying Viscosity Recovery Following Extrusion or Spraying Using Thixotropy Assessment on a Rotational Rheometer

Revealing Sorption/Desorption Properties of Micro-Crystalline Cellulose by Means of STA

The Identify Database as an Archive for NETZSCH and User Data

Simultaneous STA-FT-IR on Biomass Straw

The DSC 214 Polyma for Kinetic Modeling of Isothermal Crystallization of Polyolefins

Detection of Plasticizers in Sporting Goods and Toys by Means of TGA-FT-IR

Analysis of 200 Unknown DSC Curves by Means of Identify Using its Polymer Libraries

DSC 214 Polyma for the Kinetics Analysis of the Isothermal Crystallization of Polyolefines

The DSC 214 Polyma: Ideal for Temperature-Modulated Measurements

A Study on the Oxidation Behavior of Cooking Oils by Means of HP-DSC

Detection of Ultra-Small Residual Masses by Means of TGA − The Story of a Little Bird and an Elephant

Material Characterization of Polymers by Methods of Thermal Analysis − A Comprehensive Study on PMMI by Means of DSC, TGA and TGA-FT-IR

ZoomOptics in the LFA 467 HyperFlash^® – The Most Versatile Unit of Its Kind

Characterization of Photo-Curing Processes by Means of UV-DSC

Characterization of the Composition and Thermal Decomposition Profile of Recycled Carpet Samples by TGA-FT-IR, TGA-MS, and TGA-GC-MS

Evaluation of a Complete Coin Cell Battery Using the MMC 274 Nexus^® with Coin Cell Module

Characterization of Cooking Oils by Means of Differential Scanning Calorimetry (DSC)

Simultaneous Detection of Organic Functional Groups and Inorganic Molecules in Thiol-Capped ZnO Nanoparticles with Evolved Gas Analysis by FT-IR and MS

Influences of Heating and Cooling Rates on the DSC Measurement Result

Factors Influencing the TGA Test Result

Thermal Conductivity Measurements of Concrete Using the Heat Flow Meter (HFM) and Guarded Hot Plate (GHP) Methods

Measurement of the Thermal Conductivity of Thermoelectric Materials by Means of the Laserflash Technique

Standard Starch Testing Using a Kinexus Rotational Rheometer

Overcoming Solvent Evaporation/Drying During Rheological Testing on a Rotational Rheometer

Determination of Pressure-Sensitive Tack and Adhesion Using Axial Measurements on a Rotational Rheometer – Blu-Tack®

Quantifying Shear Thickening Behavior Using the Power-Law Model on a Rotational Rheometer – Corn Starch-Water Mixture

Investigations on UV-Curing Systems by Means of Photo-Differential Scanning Calorimetry (Photo-DSC)

Material and Failure Analysis of Plastic Parts by Means of DSC

TGA-FT-IR Coupling – Improved Sensitivity by Means of Fast Heating Rates

Oxygen Trap System (OTS^®) for the Reduction of Residual Oxygen in NETZSCH Thermal Analyzers

Predicting the Compounding Performance of Pressure-Sensitive Adhesives (PSAs)

Effect of Droplet Concentration on Emulsion Viscosity

Predicting the Stability of Dispersions with a Yield Stress

Evaluating the Rheological Properties of Hyaluronic Acid Hydrogels for Dermal Filler Applications

Processing Non-Newtonian Products: Determining the Pressure Drop for a Power Law Fluid Along a Straight Circular Pipe

Evaluating Product Spreading Characteristics on Rotational Rheometer Using the Power Law Model

Monitoring Structure Rebuild (Thixotropy) Following Extrusion from a Bottle, Tube or Spray Head

Evaluating Product Delivery Characteristics from a Bottle, Tube or Spray Pack

Evaluating Product Thermal Stability by Temperature Cycling on a Rotational Rheometer

Determination of Yield Stress of Complex Fluids by Stress Growth Test on a Rotational Rheometer – Body Lotion

Determination of Yield Stress of Complex Fluids by Multiple Creep Tests on a Rotational Rheometer – Moisturizing Lotion

Influence of the Atmosphere and Sample Shape on TGA Tests Results

Measurement of the Thermophysical Properties of Pure Molybdenum

Determination of the Oxidation Stability of Fats and Oils

Assessing Dispersion Stability Using Oscillation Testing on a Rotational Rheometer – Shower Gels

Molecular and Bulk Characterization of PLA and PLGA Samples Using Rheometry and Multidetector GPC - Exploring the Relationship Between Molecular Characteristics and Bulk Rheological Properties of Biodegradable Polymers

How Quality Control and Failure Analysis of PP Can Effectively Prevent Scrapping of Goods

Investigations of the Influence of Crucible Geometry on the Combustion of Different Carbon Black Samples

The Real Performance of Rubber-Metal Buffers During Operation Determined by the High-Force DMA GABO Eplexor^®

Coin Cell Cycling in a Novel DSC-Like System

Effect of Density on the Thermal Performance of a Glass Fiber Insulation Material

Comparison of a Blue Diode Laser with a Mercury Arc Lamp in the Curing of a Water-Soluble Resin by Photo-DSC and Photo-DEA

High Sample Throughput of the LFA 467 HyperFlash^® – The Most Versatile Unit of Its Kind

Thermal Analysis of a PTFE/Graphite Compound by Means of the New Perseus STA 449 FT-IR Coupling

Peak Separation Software – Easy Identification of the Components in a Multilayer

Thermokinetics Software to Predict a Curing Reaction

Fast Temperature Modulation by Means of the DSC 214 Polyma for More Information without Time Loss

Stability of Identify Database Search Results with Regard to Sample Mass and Heating Rate

Investigations on the Combustion Behavior of Energy Plants

When and How Must Samples Be Coated During LFA Measurements

Direction-Dependent Determination of the Thermal Conductivity of Fiber-Reinforced Plastics Using the LFA 467 HyperFlash^®

Ceramic Mass

DSC Crucibles – More than Just Sample Holders

Measuring the Thermal Diffusivity of Small Semiconductor Devices by Means of the ZoomOptics of the LFA 467 HyperFlash^®

VariPhi – The Patented Immersion Heater for Variation of the Ф-Factor in Thermal Runaway Tests

Thermal Conductivity of Inhomogeneous Refractories − LFA Versus Hot Wire Method

Characterization and Classification of Recycled Polyamides by Means of Identify

Distinguishing Between Different Types of Polyethylene by Means of Identify

Heat Flow Meter (HFM) with Instrumentation Kit: Measurements on Pyrex® – in Good Agreement with the Laser Flash Analysis (LFA) and Literature

LFA 467 with Short Pulse Duration – Ideal for Thin, Higly Conductive Samples Like Copper, Even at -100°C

Screening of Hydrogen Peroxide Solutions by Means of Scanning Tests and ARC^® Tests

Measurement of the Thermal Conductivity of Elastomers by Means of the LFA 467 HyperFlash^®

Epoxy Curing Investigated by Means of the DSC 214 Polyma and MMC 274 Nexus^®

LFA 467 HT HyperFlash: Fastest Mini-Tube Furnace with Excellent Stabilization Behavior for Shortest Measurement Times and High Sample Throughput

Determination of the Glass Transition of Rubber Samples by Means of DMTA in Compression Mode

Investigating the Visco-Elastic Behavior of Seals and Gaskets by Means of DMTA

Heat Build-Up Tests – An Easy Task for the Eplexor^® Series Thanks to the Modular Concept

SBA 458 Nemesis^® – Expansion of the Temperature Range

Modulated Thermogravimetry for the Determination of the Activation Energy of Polystyrene

Concavus^® Crucibles for DSC Measurements: Choosing the Best

Amoxicillin: Melting or Degradation? DSC and TGA-FT-IR Provide Answers!

From Easy Handling to Power Evaluation: TGA-FT-IR Measurement on Diclofenac Sodium

Polymer Identification by Means of KIMW-Database and Identify

Penetration Model in the NETZSCH LFA Software − Porous Materials Finally Handled Properly!

Purity Determination of Nipagin by Means of DSC

Challenges in the Storage Behavior of Magnesium Stearate Solved by Means of Thermal Analysis

Good Stability Versus Good Tabletability: The Choice of Modification

Reliable Identification of Eudragit® by Means of Modulated DSC

Shelf Life Determination of Potassium Clavulanate Via Thermogravimetry

TGA-FT-IR for Better Understanding the Degradation of Potassium Clavulanate

Investigation of the Influence of Humidity on Magnesium Stearate by Means of Thermal Analysis and PXRD

SBA 458 Nemesis^® – High Repeatability and Reproducibility by Measurements on BiTeSe

Determination of the Ca/Mg Ratio of Dolomite with the Help of a Pure CO2 Atmosphere

Low-Temperature Differential Scanning Calorimetry Also for Metals

How Does Cotton Get into the Lipstick?

Production of Hydrogen by Thermochemical Water Splitting

Energetic Effects of a Granulate Mixture of Aluminum and Manganese Ore

Dynamic-Mechanical Analysis to 800°C in the DMA 303 – Characterization of Glass Materials

How Does Chocolate Feel in the Mouth? A Simulation by Means of Kinexus

The KIMW Polymer Database for DSC Measurements: Its Content Has Doubled Now!

TRD_LED – The Latest Measurement Technique for Transmission and Optical Smoke Density

Polymers and Temperature – A Hot Relationship

Temperature-Modulated DSC Measurements at High Heating Rates

How Does the Drying of Paints Influence their Rheological Properties? The Immobilization Cell

Interaction of a Lactose Powder with the Powder Cell

TM-DSC – The Method of Choice for Determination of the Glass Transition and Post-Curing of Epoxy Resins

How Much Vanillin is Contained in Vanillin Sugar?

Dry. Humid. Wet. Polyamide and Water

Thermal and Rheological Characterization of Nail Gel Curing

Oxidative Stability of Polymers: The OIT Test

Crystallization of a High-Performance Semi-Crystalline Polymer: PEEK

Thermal Analysis of Kaolin

Composition of a Bicycle Tire Casing

Optimizing Injection Molding Parameters of HDPE by Means of DSC and Kinetics Neo

Simultaneous TG-MS and TG-FT-IR for Innovative Battery Materials

Quality Differences in Commercial Charcoal

Understanding Tack Tests with Kinexus

Mechanical Characterization of a PUR Foam by Means of DMA − Statically and Dynamically, No Problem!

Creep Behavior of PE-HD under Different Loads and Temperatures

Mass Spectrometry Coupled to Thermogravimetry for the Study of Residual Solvents in Drugs

Characterization of Biomolecules by Means of DSC: Lysozyme

Determination of the Thermal Conductivity of Highly Transparent Materials

High-Performance Rubber Seals Under Realistic Application Conditions with the Help of DMA

Rheological Properties of Chocolate Wanted? Kinexus Makes it Easy!

Competitive Analysis of the Rubber of Bicycle Tubes by Means of TGA-MS

Determination of the Thermal Conductivity by Means of TCT – Straightforward through Direct Measurement

Lactose and Water – A Story about Affinity

Identification of Polymer Mixtures (PE/PP) by Means of Identify