Application Literature

Deeper Insight Into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetry and GC-MS, Part 1

A Basic Introduction to Rheology

A New Sample Holder for Low-Viscosity Liquids Part 2 – Test Results on an Epoxy Resin During Curing

A Study on the Oxidation Behavior of Cooking Oils by Means of HP-DSC

About the Calibration of the Coin Cell Module of the MMC 274 Nexus^®

About the Efficiency of Charging and Discharging Processes in Lithium-Ion Accumulators

About the Influence of the Particle Size on the Thermal Behavior of Inorganic Powders

About the Rheology of Egg Liqueur

About the Thermal Behavior of Acetylsalicylic Acid and Aspirin

About the Thermal Behavior of Acetylsalicylic Acid and Aspirin®

About the Thermal Stability of Glycerol

Acrylic Resin

Acrylonitrile Butadiene Styrene Copolymer

Adhesion Behavior of Tire Cords, Measured by Means of DMTA – Temperature Dependence and Stress Limits

Adhesive Film

Albumin

Aluminum Hydroxide

Aluminumchlorohydrate Al2Cl(OH)5

Amorphous Fe Alloy

Amoxicillin: Melting or Degradation? DSC and TGA-FT-IR Provide Answers!

Amoxicillin: Schmelzen oder Zersetzung? DSC und TG-FT-IR liefern die Antwort!

Analyse der Füllstofforientierung beim Spritzgießen mittels TMA-Messungen

Analysis of 200 Unknown DSC Curves by Means of Identify Using its Polymer Libraries

Anwendung der Cox-Merz-Regel: Eine Schritt-für-Schritt-Anleitung

Aspartam: Süßes Wunder oder zugelassenes Gift? Analyse von Aspartam mittels DSC und TG-FT-IR.

Aspartame: Sweet Wonder or Allowed Poison? Analysis of Aspartame by Means of DSC and TG-FT-IR.

Assessing Dispersion Stability Using Oscillation Testing on a Rotational Rheometer – Shower Gels

Assessing the Dispersion Stability Using Creep Testing on a Rotational Rheometer – Shower Gels

Auswertung des Polymerverhältnisses in einem PET/PC-Blend mit Hilfe der temperaturmodulierten DSC

Backpapier und Silikonbackmatte – Kann man sie bedenkenlos verwenden?

BaZrO3

BeFlat^® – What Is It?

Behavior of Nipagin under Thermal Influence – Investigations by Means of TGA-FT-IR Coupling

Benefit of the Strain-Controlled Mode for the Investigation of Rubber Compounds Using High-Force DMTA

Bestimmung der Lagerfähigkeit von Kaliumclavulanat mittels Thermogravimetrie

Bestimmung der Oxidationsstabilität von Fetten und Ölen

Bestimmung der Scherviskosität einer Polymerschmelze mittels Oszillationsmessung

Bestimmung der Sorptions-/Desorptionseigenschaften mikrokristalliner Cellulose mittels STA

Bestimmung der Temperaturleitfähigkeit einer dünnen Polymerschicht mittels konventioneller LFA-Analyse

Binder Burnout of Stabilized Zirconia

Biomass

Blowing Agents in Insulation Materials (Foam)

Blähgrafit – Eine nachhaltige Lösung für Flammschutzmittel in Kunststoffen

Calcium Hypochlorite

Carbon Brush

Carbon Composites - Carbon/Carbon

Carbon Fiber Insulations

Cement

Cement / Gypsum

Cement Raw Material

Ceramic Mass

Ceramic Vanistor

Ceramic-Diamond Composite

Challenges in the Storage Behavior of Magnesium Stearate Solved by Means of Thermal Analysis

Challenging Samples: A Solution to Monitor Curing

Characterization and Classification of Recycled Polyamides by Means of Identify

Characterization of Cooking Oils by Means of Differential Scanning Calorimetry (DSC)

Characterization of Photo-Curing Processes by Means of UV-DSC

Characterization of the Composition and Thermal Decomposition Profile of Recycled Carpet Samples by TGA-FT-IR, TGA-MS, and TGA-GC-MS

Characterizing Gel Properties Using Oscillation Testing on a Rotational Rheometer

Characterizing Opthalmic Viscosurgical Devices (OVDs) Using a Rotational Rheometer

Characterizing the Microstructure of ´Worm-like Micelles` Using Rheology

Charakterisierung optisch härtender Systeme mit UV-DSC

Charakterisierung von Speiseölen mittels Differential Scanning Calorimetry (DSC)

Chocolate

Clay Brick

Coin Cell Cycling in a Novel DSC-Like System

Cold-Forged Iron

Comparison of a Blue Diode Laser with a Mercury Arc Lamp in the Curing of a Water-Soluble Resin by Photo-DSC and Photo-DEA

Comparison of Tensile and Bending Tests on a Layered Composite Material

Complete Thermal Characterization of PTFE – The Combination of DSC, DMA and Rotational Rheometry

Concavus^® Crucibles for DSC Measurements: Choosing the Best

Cordierite

Creatine Monohydrate

Creep Recovery Tests for Elastomer Seals? The DMA GABO EPLEXOR 2000 N Delivers the Response

Cyclohexanone

Das Beste wählen: Concavus^®-Tiegel für DSC-Messungen

Das Modell Penetration in der NETZSCH LFA-Software − Sachgemäße Behandlung poröser Materialien!

Das Modell Penetration in der NETZSCH LFA-Software − Sachgemäße Behandlung poröser Materialien!

Decomposition Behavior of a Rubber Mixture

Decomposition Behavior of an NR/SBR Mixture

Deeper Insight into the Pyrolysis of Acetylsalicylic Acid by Means of Kinetic Analysis, Part 2

Deeper Insight into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetric Measurements in Various Gas Atmospheres, Part 3

Deeper Insight into the Pyrolysis of Acetysalicylic Acid by Means of Thermogravimetry and Mass Spectrometry, Part 4

Dehydration Kinetics and Long-Term Predictions for Calcium Hydrogen Phosphate Dihydrate

Dehydratisierungskinetik und Langzeitprognosen für Calciumhydrogenphosphat-Dihydrat

Dental Alloys

Der Paddelrührer: Die Lösung für die Messung der Viskosität trotz Sedimentation

Der patentierte VariPhi^®-Heizer zur Variation des Ф-Faktors während der Untersuchung eines „Thermal Runaway“

Detecting Weak Thermal Effects by Means of Differential Scanning Calorimetry

Detection of Plasticizers in Sporting Goods and Toys by Means of TGA-FT-IR

Detection of Ultra-Small Residual Masses by Means of TGA

Detektion ultra-kleiner Restmassen mittels TG

Determination of Pressure-Sensitive Tack and Adhesion Using Axial Measurements on a Rotational Rheometer – Blu-Tack

Determination of TD24 by ARC^® Instruments for Thermal Risk Assessment in Chemical Processes

Determination of the Degree of Crystallinity of Polymers (PE and PP)

Determination of the Glass Transition of Rubber Samples by Means of DMTA in Compression Mode

Determination of the Oxidation Stability of Fats and Oils

Determination of the Thermal Diffusivity of a Thin Polymer Film by Conventional LFA Analysis

Determination of Yield Stress of Complex Fluids by Model Fitting Using a Rotational Rheometer – Gels

Determination of Yield Stress of Complex Fluids by Multiple Creep Tests on a Rotational Rheometer – Moisturizing Lotion

Determination of Yield Stress of Complex Fluids by Oscillation Tests on a Rotational Rheometer – Various Gel Samples

Determine the Specific Heat Capacity During an Isothermal Measurement – Use the Temperature-Modulated DSC 214 Polyma

Die neue SBA 458 Nemesis^® – Messung des Seebeck-Koeffizienten an reinem Nickel

Die richtige Wahl – Vergleich von Zug-, Biegung- und Dual Cantilever-Messmodi in der DMA am Beispiel von PE

Die Zersetzung von Kaliumclavulanat mittels TG-FT-IR besser verstehen

Diesel

Direction-Dependent Determination of the Thermal Conductivity of Fiber-Reinforced Plastics Using the LFA 467 HyperFlash^®

Distinguishing Between Different Types of Polyethylene by Means of Identify

DNA

Druckabhängige Untersuchungen der Verdampfung von Flüssigkeiten mittels Dynamischer Differenzkalorimetrie (DSC)

DSC and Rotational Rheometry: Two Complementary Techniques

DSC und Rotationsrheometrie: Zwei sich ergänzende Techniken

Easy Determination of the Specific Heat Capacity of Glass Wool by Means of HFM Measurements

Effect of Density on the Thermal Performance of a Glass Fiber Insulation Material

Effect of Droplet Concentration on Emulsion Viscosity

Einfache Bestimmung der spezifischen Wärmekapazität von Glaswolle mittels HFM-Messung

Einfache Handhabung bis hin zur leistungsfähigen Auswertung: TG-FT-IR-Messung an Diclofenac-Natrium

Einfluss der Abkühlrate auf das thermische Verhalten von PET

Einfluss der Atmosphären und Probenform auf das TG-Messergebnis

Einfluss der Heiz- und Kühlrate auf das DSC-Messergebnis

Einfluss der Heizrate auf den Glasübergang von Laktose

Einfluss der Heizrate auf die Glasübergangstemperatur elastomerer Werkstoffe für die DMA-GABO EPLEXOR-Serie

Einflussfaktoren auf das TG-Messergebnis

Einkristalline Quarzwerkstoffe als ideale Materialien zur Temperaturkalibrierung für den neuen Hochtemperatur-EPLEXOR

Energie und Zeit sparen mit der neuen HFM 446 Lambda Eco-Reihe

Engine Oil

Epoxy Curing Investigated by Means of the DSC 214 Polyma and MMC 274 Nexus^®

Epoxy Powder Coating

Epoxy Resin

EPS Foam Insulation

Ethylene Glycol

Evaluating Non-Linear Visco-Elastic Effects Using Normal Force Measurements on a Rotational Rheometer – Body Wash

Evaluating Product Delivery Characteristics from a Bottle, Tube or Spray Pack

Evaluating Product Spreading Characteristics on a Rotational Rheometer Using the Power Law Model

Evaluating Product Spreading Characteristics on Rotational Rheometer Using the Power Law Model

Evaluating Product Texture Using Oscillatory Testing on a Rotational Rheometer

Evaluating Product Thermal Stability by Temperature Cycling on a Rotational Rheometer

Evaluating the Polymer Ratio in a PET/PC Blend by Means of Modulated DSC

Evaluating the Rheological Properties of Hyaluronic Acid Hydrogels for Dermal Filler Applications

Evaluation of a Complete Coin Cell Battery Using the MMC 274 Nexus^® with Coin Cell Module

Expandable Graphite – A Sustainable Solution for Flame Retardants in Plastics

Factors Influencing the TGA Test Result

Fast Temperature Modulation by Means of the DSC 214 Polyma for More Information without Time Loss

Fiber-Reinforced Plastics (GFRP/CFRP)

Fiber-Reinforced Polymer (PP)

Floor Tiles

From Easy Handling to Power Evaluation: TGA-FT-IR Measurement on Diclofenac Sodium

From Low to High Shear Rates: NETZSCH Reaches Them All

Fulfulling the FDA’s Rheology Testing Requirements for Abbreviated New Drug Applications (ANDA) for Topical Creams

Gasification of Carbon under a Humid Atmosphere

Gefährdungspotential von Zersetzungsreaktionen am Beispiel von Wasserstoffperoxid (H2 O2 )

Glass

Glass for Plasma Display Panel

Good Stability Versus Good Tabletability: The Choice of Modification

Gummibärchen – Bunt, temperamentvoll und anspruchsvoll in ihren mechanisch-dynamischen Eigenschaften

Gummy Bears - Colorful, Temperamental and Demanding in Their Dynamic-Mechanical Properties

Gute Stabilität gegenüber guter Tablettierbarkeit: Die Wahl der Modifikation

Gypsum (Calcium Sulfate Dihydrate)

Handbook Metals and Alloys Cover

Handbook Metals and Alloys Cover 960x640

Hazard Potential of Decomposition Reactions Using the Example of Hydrogen Peroxide (H2O2 )

Heat Build-Up Tests – An Easy Task for the EPLEXOR Series Thanks to the Modular Concept

Heat Flow Meter (HFM) with Instrumentation Kit: Measurements on Pyrex - in Good Agreement with the Laser Flash Analysis (LFA) and Literature

Heat Transfer Between 2 Al Plates (MTX Test)

Heat Transfer Paste

Herausfordernde Proben: Lösung zur Aufzeichnung des Aushärteverhaltens

Herausforderungen meistern beim Lagerverhalten von Magnesiumstearat mittels Thermischer Analyse

High Sample Throughput of the LFA 467 HyperFlash^® – The Most Versatile Unit of Its Kind

High-Speed Furnace

High-Speed-Ofen

Highly Corrosion-Resistant Metal Alloy

Hoher Probendurchsatz der LFA 467 HyperFlash^® - die Vielseitigste LFA ihrer Art

How Does My Powder Flow? In One Minute to the Result with the Kinexus Rotational Rheometer

How Quality Control and Failure Analysis of PP Can Effectively Prevent Scrapping of Goods

How to Apply the Cox-Merz Rule: A Step-by-Step Guide

How To Detect Residual Caffeine in Decaffeinated Instant Coffee?

How to Measure Rigid, Higher Thermal Conductivity Samples by Means of HFM

How to Measure Thin Insulation Samples with the HFM

How to Measure Viscosity Despite Sedimentation: The Paddle Stirrer

How to Obtain Shear Viscosity of a Polymer Melt with an Oscillation Measurement

How Will My Asphalt Binder or Bitumen Behave in the Future?

Hydrogen Emission from Zircaloy BRC-276 under Water Vapor at Higher Temperatures

Hydrogen Storage Materials - Magnesium Hydride (MgH2)

Hydromagnesite

Identification of Polymers in Blends by Means of TGA FT-IR and the NETZSCH-FT-IR Database of Polymer

Identification of Polymorphic Forms of Sorbitol

Identifizierung polymorpher Formen von Sorbitol

Identifizierung von Polymeren in Blends mittels TG-FT-IR und der NETZSCH-FT-IR-Datenbank für Polymere

Improving Process Conditions – Determining the Thermal Stability of Eudragit® by Means of TGA-FT-IR

Inconel 718

Inconel 718

Inconel 718

Inconel 738

Influence of the Atmosphere and Sample Shape on TGA Tests Results

Influence of the Cooling Rate on the Thermal Behavior of PET

Influence of the Heating Rate on the Glass Transition of Lactose

Influence of the Heating Rate on the Glass Transition Temperature of Elastomer Materials for the DMA GABO EPLEXOR Series

Influences of Heating and Cooling Rates on the DSC Measurement Result

Insulating Coatings on Paper

Investigating the Visco-Elastic Behavior of Seals and Gaskets by Means of DMTA

Investigation of Alkali Salts with the STA 449 F5 Jupiter^®

Investigation of the Influence of Humidity on Magnesium Stearate by Means of Thermal Analysis and PXRD

Investigation of the Oxidative Stability of Polyolefins and Thermoplastic Elastomers by Means of DSC

Investigations of the Influence of Crucible Geometry on the Combustion of Different Carbon Black Samples

Investigations on the Combustion Behavior of Energy Plants

Investigations on UV-Curing Systems by Means of Photo-Differential Scanning Calorimetry (Photo-DSC)

Kinetic Analysis of the Shear Viscosity to Predict the Curing Behavior of a 2-Part Epoxy Adhesive

Kinetische Analyse der Scherviskosität zur Vorhersage des Aushärteverhaltens eines 2-Komponenten-Epoxidklebstoffs

Lactose

LFA 467 HT HyperFlash: Fastest Mini-Tube Furnace with Excellent Stabilization Behavior for Shortest Measurement Times and High Sample Throughput

LFA 467 HT HyperFlash: Neuer Probenhalter − speziell für Metallschmelzen

LFA 467 HT HyperFlash: New Sample Holder Dedicated to Liquid Metals

LFA 467 HT HyperFlash: Schnelle Mini-Rohröfen mit ausgezeichnetem Stabilisierungsverhalten für kürzeste Messzeiten und hohen Probendurchsatz

LFA 467 mit kurzer Pulsdauer – Ideal für Kupfer und dünne hochwärmeleitende Proben sogar bei -100 °C

LFA 467 with Short Pulse Duration - Ideal for Thin, Highly Conductive Samples like Copper, Even at -100°C

Liquid Metals – Cast Iron

Liquid Sample Holder - Silicon Grease

Low-Alloyed Steel

Lubricant

Lösungen von NETZSCH zur Identifizierung und Quantifizierung verschiedener Kunststoff-Zusammensetzungen im Recyclingkreislauf

Material and Failure Analysis of Plastic Parts by Means of DSC

Material Characterization of Polymers by Methods of Thermal Analysis

Material Testing Beyond the Linear Visco-Elastic Range: Tensile Testing in the DMA GABO EPLEXOR

Material- und Schadensanalyse von Kunststoffbauteilen mittels DSC

Materialcharakterisierung von Polymeren mit den Methoden der Thermischen Analyse

Materialprüfung jenseits des linear viskoelastischen Bereichs: Zugprüfung im DMA GABO EPLEXOR

Measurement of the Thermal Conductivity of Elastomers by Means of the LFA 467 HyperFlash^®®

Measurement of the Thermal Conductivity of Thermoelectric Materials by Means of the Laserflash Technique

Measurement of the Thermophysical Properties of Pure Molybdenum

Measurement on an Unstable, Viscous Liquid by Means of a Relative Geometry

Measuring the Thermal Diffusivity of Small Semiconductor Devices by Means of the ZoomOptics of the LFA 467 HyperFlash^®

Melting Point Effect of High Pressures of CO2 on a Pharmaceutical Compound Demonstrated with HP-DSC

Melting, Boiling and Vapor Pressure of 3 Polycyclic Aromatic Hydrocarbons

Messung der Temperaturleitfähigkeit von kleinen Halbleiterbauelementen mit Hilfe der ZoomOptics der LFA 467 HyperFlash^®

Messung der Wärmeleitfähigkeit thermoelektrischer Materialien mittels Laserflash-Technik

Messung der Wärmeleitfähigkeit von Elastomeren mittels LFA 467 HyperFlash^®

Messung steifer Proben mit höherer Wärmeleitfähigkeit mittels HFM

Messung von instabilen viskosen Flüssigkeiten mittels einer relativen Geometrie

Metal Hybrides

Mg(OH)2

Modulated Thermogravimetry for the Determination of the Activation Energy of Polystyrene

Mold Materials for Casting of Dental Alloys

Molecular and Bulk Characterization of PLA and PLGA Samples Using Rheometry and Multidetector GPC

Molybdenum

Molybdenum Wire

Monitoring Damage Development of Static Sealing Elements Using the Simultaneous Dynamic Mechanical and Dielectric Analyzer DIPLEXOR®

Monitoring Structure Rebuild (Thixotropy) Following Extrusion from a Bottle, Tube or Spray Head

Mouth-Nose-Protection Materials Under the Influence of Humidity

Mund-Nasen-Schutz-Materialien unter dem Einfluss von Feuchtigkeit

Nachweis schwacher thermischer Effekte mittels dynamischer Differenzkalorimetrie

Nachweis von Weichmachern in Sportartikeln und Spielzeug mittels TG-FT-IR

NaHCO3

NETZSCH Proteus^® for Quality Control

NETZSCH Proteus^® zur Qualitätskontrolle

NETZSCH Tools to Identify and Quantify Different Plastic Compositions in the Recycling Stream

NETZSCH_App-Sheet.pdf

New Sample Holder for Low-Viscosity Liquids Part 1 – Principle and Test Results of Water

Nickel-Based Superalloy (Inconel 600)

Nickel-Based Superalloy (Inconel 600)

Nickel-Based Superalloy (Inconel 600)

Nickel-Based Superalloy (Inconel 600)

Novel Sample Preparation Technique for Testing Biological Tissue Via Differential Scanning Calorimetry

OLEDS (Organic Light Emitting Diodes)

Optimierung des Entwässerungsprozesses von Pharmazeutika mittels NETZSCH Kinetics Neo

Optimizing Dehydration Processes of Pharmaceuticals with NETZSCH Kinetics Neo

Overcoming and Quantifying ´Wall Slip` in Measurements Made on a Rotational Rheometer

Oxidative Stability of Polyethylene

Oxide Melts - Slags

Oxide Refractory

Oxygen Trap System (OTS^®) for the Reduction of Residual Oxygen in NETZSCH Thermal Analyzers

Paraffin PCM

Parchment Paper and Silicone Baking Mat – Are They Safe to Use?

PbTe – A Thermoelectric Material Heat Capacity and Thermal Conductivity

PCM - Phase Change Materials - From the Solid into the Melt - Investigation of Thermal Conductivity by Means of the LFA 467 HyperFlash^® and DSC 204 F1 Phoenix^®

PCM – Phase Change Materials Vom Feststoff in die Schmelze Untersuchung der Wärmeleitfähigkeit mittels LFA 467 HyperFlash^® und DSC 204 F1 Phoenix^®

PE - Determination of the Degree of Crystallinity

Peak Separation Software - Easy Identification of the Components in a Multilayer

Penetration Model in the NETZSCH LFA Software − Porous Materials Finally Handled Properly!

Penetration Model in the NETZSCH LFA Software − Porous Materials Finally Handled Properly!

PET/PC Blend

PMMA (Polymethyl Methacrylate)

PMMA (Polymethylmethacrylate)

Polyamide (GF-Filled)

Polycarbonate

Polycarbonate

Polycarbonate

Polycarbonate (PC)

Polycarbonate (PC)

Polyester Resin on Mineral Wool

Polyetherimide

Polyethylene

Polyethylene (PE-HD)

Polyethylene (PE-HD)

Polyethylene Film (LD/LLD-PE)

Polyethylene High Density

Polyethylene LDPE LLDPE HDPE

Polyetrafluorethylene

Polymer Identification by Means of KIMW-Database and Identify

Polymer Rheology and Molecular Mass

Polymer-Rheologie und Molekularmasse

Polymererkennung mittels KIMW-Datenbank und Identify

Polyoxymethylene

Polyoxymethylene (POM)

Polyoxymethylene (POM)

Polyoxymethylene POM

Polypropylene

Polypropylene

Polystyrene

Polystyrene

Polytetrafluoroethylene (PFTE)

Polyvinyl Chloride

Polyvinyl Chloride (PVC) - Gelation Degree

Polyvynil Chloride

Portland Cement

Powder Coating

Powder Coating

Power Cables – Transfer of the Real Operating Conditions from the Field into the Laboratory Using the High-Load DMA GABO EPLEXOR®

Precise Determination of the Specific Heat Capacity in a Wide Temperature Range by Means of DSC

Predicting the Compounding Performance of Pressure-Sensitive Adhesives (PSAs)

Predicting the Stability of Dispersions with a Yield Stress

Pressure-dependent Investigation of the Evaporation of Liquids by Means of Differential Scanning Calorimetry (DSC)

Processing Non-Newtonian Products: Determining the Pressure Drop for a Power Law Fluid Along a Straight Ciruclar Pipe

Propylene Glycol - Water Mixture

Präzise Bestimmung der spezifischen Wärmekapazität in einem großen Temperaturbereich mittels DSC

PTFE (Polyetrafluoroethylene)

PTFE - Ein faszinierendes Polymer untersucht mit modernen Thermoanalyse-Methoden

PTFE Materials

PTFE – A Fascinating Polymer Investigated by Advanced Thermal Analysis Techniques

Purity Determination of Nipagin by Means of DSC

Quality Differences in Commercial Charcoal

Qualitätsunterschiede bei handelsüblicher Holzkohle

Quantification of Ammonia Release from Polymer Blowing Agents by Means of TGA-FT-IR

Quantifizierung der Ammoniakfreisetzung aus Polymer-Treibmitteln mittels TG-FT-IR

Quantifying Shear Thickening Behavior Using the Power Law Model on a Rotational Rheometer

Quantifying Shear Thickening Behavior Using the Power-Law Model on a Rotational Rheometer – Corn Starch-Water Mixture

Quantifying Shear Thinning Behavior on a Rotational Rheometer Using the Power Law Model

Quantifying Viscosity Recovery Following Extrusion or Spraying Using Thixotropy Assessment on a Rotational Rheometer

Reinheitsbestimmung von Nipagin mittels DSC

Reliable Identification of Eudragit® by Means of Modulated DSC

Revealing Sorption/Desorption Properties of Micro-Crystalline Cellulose by Means of STA

Rheological Properties of a Lubricating Grease in Accordance with DIN 51810-2

Rheological Properties of Lubricating Grease in Accordance with DIN 51810-1

Rheologie - Der Grund für schöne Nägel

Rheologische Eigenschaften von Schmierfett gemäß DIN 51810-1

Rheologische Eigenschaften von Schmierfett gemäß DIN 51810-2

Richtungsabhängige Bestimmung der Wärmeleitfähigkeit an faserverstärkten Kunststoffen mittels LFA 467 HyperFlash^®

Rückstellungstests für Elastomerdichtungen - Die Antwort liefert der GABO DMA EPLEXOR

SBA 458 Nemesis^® – Expansion of the Temperature Range

SBA 458 Nemesis^® – Broadening of the Acceptable Sample Geometry Range

SBA 458 Nemesis^® – Erweiterung der zulässigen Probengeometrien

SBA 458 Nemesis^® – Erweiterung des Temperaturbereichs

SBA 458 Nemesis^® – Hohe Wiederholpräzision und Reproduzierbarkeit anhand von Messungen an BiSeTe

Schokolade

Screening of Hydrogen Peroxide Solutions by Means of Scanning Tests and ARC^® Tests

Screening von Wasserstoffperoxidlösungen mittels Scanning- und ARC^®-Test

Semiconductor Substrates

Shape Memory Alloy

Shelf Life Determination of Potassium Clavulanate Via Thermogravimetry

SiC Honeycomb Structure

Sichere Identifizierung von Eudragit® mittels modulierter DSC

Sie möchten die dynamisch-mechanischen Eigenschaften Ihrer Hochtemperatur-Werkstoffe unter anwendungsnahen Bedingungen ermitteln? Unser neuer Hochtemperatur-EPLEXOR kann es!

Silicium Carbide

Silicon Carbide

Silicone Nitride (Green Body)

Simultane STA-FT-IR-Messung der Biomasse Stroh

Simultaneous Detection of Organic Functional Groups and Inorganic Molecules in Thiol-Capped ZnO Nanoparticles with Evolved Gas Analysis by FT-IR and MS

Simultaneous STA-FT-IR on Biomass Straw

Single-Crystalline Quartz Materials as Ideal Substances for Temperature Calibration of the New High-Temperature EPLEXOR