Highlights
“高圧下での”低温DSC測定が可能！
多くの物理プロセスや化学反応は、雰囲気ガスの圧力に影響されます。この理由から、加圧条件下でのDSC測定が、しばしば、必要となります。
高圧示差走査熱量計DSC 204 HP Phoenix®によって、ガスのタイプによって異なりますが、-150°C ～ 600°Cの温度範囲で、真空から15 MPa (150 bar) までの試料熱反応の測定が可能になります。
試料室雰囲気は、高圧下ガス静止でも高圧下ガスフロー条件でも可能です。パージガスフローの正確な制御を可能にする電子モニター制御装置が、測定結果の高い精度と再現性を可能にします。
低温度領域の測定には、定評を頂いているCC 200 L液体窒素冷却装置が使用可能です。
この高圧DSCの安全性については、第三者機関による静水圧試験などにより厳密に確認されており、運転中の安全性は、適切な安全装置により保証されています。
NETZSCH Analysis Instruments at Harvard University
"We chose to work with NETZSCH’s HP-DSC because of its versatility and robustness. By allowing us to reliably access high pressures up to 150 bar with a wide range of gas environments, NETZSCH’s HP-DSC has greatly facilitated our group’s efforts to investigate Phase TransitionsThe term phase transition (or phase change) is most commonly used to describe transitions between the solid, liquid and gaseous states.phase transitions in next-generation thermal materials."
Prof. Jarad Mason - Assistant Professor of Chemistry and Chemical Biology at Mason Group at Harvard University
Method
High-Pressure Differential Scanning Calorimetry (HP-DSC)
Differential Scanning Calorimetry (DSC) allows not only for the determination of phase transformation temperatures but also for the quantification of transformation enthalpies.
A type of modified DSC, in which the measurement cell is installed in an autoclave (a "pressure DSC"), allows measurements to be carried out at pressures ranging from 5 kPa to 15 MPa (high-pressure DSC).
High-pressure DSC measurements can be performed in inert or reactive gas atmospheres. When an inert gas is used, the pressure dependence can be studied when the sample transformation (usually a caloric effect) is also accompanied by a volume change. This allows dehydration and Decomposition reactionA decomposition reaction is a thermally induced reaction of a chemical compound forming solid and/or gaseous products. decomposition reactions with gas release to be studied by pressure DSC. When a reactive gas is used, the gas becomes one of the reactants and the pressure is a measure of its concentration. This method can be used to perform aging tests on organics (such as oils, fats, waxes, greases, etc.) and polymers.
Measuring Principle of a High-Pressure DSC
In contrast to the setup of a regular DSC, the measuring cell of a high-pressure DSC (HP-DSC) is surrounded by an autoclave which is supported by pressure and gas flow control systems.
Pressure and purge gas flow are adjusted via a separate control board. With the help of liquid nitrogen cooling, it is even possible to achieve temperature programs in the subambient range.
The heating and cooling rates achieved (0.01 K/min to 100 K/min and to 50 K/min, respectively) as well as the maximum and minimum temperatures are significantly influenced by the atmosphere and pressure used.
Specifications
技術仕様
広い圧力範囲
正確な圧力調整
昇温速度
温度範囲 (ガスのタイプにより異なる):
-150°C ～ 600°C (1 bar)
-90°C ～ 600°C ( 50 bar)
-50°C ～ 450°C ( 50 bar)
各種ガス雰囲気での測定
不活性: N2、希ガス
還元性:H2
酸化性: O2, CO2, air
(他のタイプのガスも可能)
500 ml/minまでの正確なガス流量制御
Software
Proteus®: Excellent Thermal Analysis Software
The DSC 204 HP Phoenix® runs under Proteus® Software on Windows®. The Proteus® Software includes everything you need to carry out a measurement and evaluate the resulting data. Through the combination of easy-to-understand menus and automated routines, a tool has been created that is extremely user-friendly and, at the same time, allows sophisticated analysis. The Proteus® Software is licensed with the instrument and can of course be installed on other computer systems.
DSC features:
- Determination of onset, peak, inflection and end temperatures
- Automatic peak search
- Transformation enthalpies: analysis of peak areas (enthalpies) with selectable baseline and partial peak area analysis
- Evaluation of CrystallizationCrystallization is the physical process of hardening during the formation and growth of crystals. During this process, heat of crystallization is released.crystallization
- Comprehensive Glass Transition TemperatureThe glass transition is one of the most important properties of amorphous and semi-crystalline materials, e.g., inorganic glasses, amorphous metals, polymers, pharmaceuticals and food ingredients, etc., and describes the temperature region where the mechanical properties of the materials change from hard and brittle to more soft, deformable or rubbery.glass transition analysis
- Automatic baseline correction
- Specific heat determination
- Recording and evaluation of the pressure signal
Consultancy & Sales
Do you have further questions about the instrument, the method and would you like to speak to a sales representative?
Service & Support
Do you already have an instrument and need technical support or spare parts?
Related Devices
Downloads and Media
Brochures
DSC 204 HP Phoenix®Brochure(pdf – 2.02 MB)
DSC 204 HP Phoenix®Data Sheet(pdf – 27 KB)
Accessories for Differential Scanning Calorimeters and ThermobalancesAccessories Catalogue(pdf – 8.5 MB)
Thermal Characterization of PolymersBrochure(pdf – 4.88 MB)
Shape the future of paints and coatingsBrochure together with Malvern Panalytical(pdf – 1.45 MB)
応用文献
