Thermosets, Paints and Adhesives
Surely you must deal with issues such as these on a day-to-day basis:
- How high is the degree of Curing (Crosslinking Reactions)Literally translated, the term “crosslinking“ means “cross networking”. In the chemical context, it is used for reactions in which molecules are linked together by introducing covalent bonds and forming three-dimensional networks.curing of the paint system?
- Can the cycle time of the thermosetting moulding still be reduced by a temperature increase?
- To what extent does the glass-fiber reinforcement of the composite influence the direction-dependent coefficient of thermal expansion?
- How high is the Thermal ConductivityThermal conductivity (λ with the unit W/(m•K)) describes the transport of energy – in the form of heat – through a body of mass as the result of a temperature gradient (see fig. 1). According to the second law of thermodynamics, heat always flows in the direction of the lower temperature.thermal conductivity of the electronic component?
Choose literature according to your field of interest from among our applications literature.
Here you find literature data we especially recommend:
AS-098-2006 Polyurethane Foam
AS-101-2006 EP Powder Coating
Take advantage of our comprehensive literature service for further application examples for your polymer field.
We recommend to especially have a look onto the following literature:
AS-032-2006 Unsaturated Polyester Resin
AS-097-2006 Epoxy Resin (Pre-Cured)
AS-106-2006 1-Component Epoxy Resin Delo-Katiobond KB 554
AS-107-2006 Methacrylates Used as Dental Restorative Material
AS-131-2006 Epoxy Resin
AS-140-2007 Vinyl Ester Resin
AS-143-2007 Polyimide Resin
AS-144-2007 Epoxy Powder Coating
AS-145-2007 Epoxy Resin
AS-146-2007 Epoxy Powder Coating
AS-147-2007 Vinyl Ester Resin
Also learn more about the extensive accessories and the user-friendly software.
Make better use of the entire information content of your measurements by employing the Advanced Software packages.
Inform yourself about our offers for Service / Support such as calibration service, training courses, users’ meetings, advisory service and contract testing.