Determination of thermoanalytical and thermophysical properties allows for the comprehensive characterization of building materials.
Knowledge about such aspects as composition, mass loss (due, for example, to binder burnout), thermal expansion, SinteringSintering is a production process for forming a mechanically strong body out of a ceramic or metallic powder. sintering, softening point and Thermal ConductivityThermal conductivity (λ with the unit W/(m•K)) describes the transport of energy – in the form of heat – through a body of mass as the result of a temperature gradient (see fig. 1). According to the second law of thermodynamics, heat always flows in the direction of the lower temperature.thermal conductivity is critical in the development of new materials and helps to ensure that final products can meet the demands being placed upon them.
is ideal for investigating issues such as the Glass Transition TemperatureThe glass transition is one of the most important properties of amorphous and semi-crystalline materials, e.g., inorganic glasses, amorphous metals, polymers, pharmaceuticals and food ingredients, etc., and describes the temperature region where the mechanical properties of the materials change from hard and brittle to more soft, deformable or rubbery.glass transition temperature of modified glass, Phase TransitionsThe term phase transition (or phase change) is most commonly used to describe transitions between the solid, liquid and gaseous states.phase transitions in plasters and mortars, and thermal Decomposition reactionA decomposition reaction is a thermally induced reaction of a chemical compound forming solid and/or gaseous products. decomposition behavior – also with instrumentation for Evolved Gas Analysis (EGA) coupled to the thermal analyzer.
The expansion and shrinkage behavior of building materials, both during production and once in use, can be determined with Dilatometry.
LFA and HFM are versatile methods for the precise determination of Thermal DiffusivityThermal diffusivity (a with the unit mm2/s) is a material-specific property for characterizing unsteady heat conduction. This value describes how quickly a material reacts to a change in temperature.thermal diffusivity and thermal conductivity on samples both small and large.
Refractories can be investigated with an instrument series that is specially tailored to this material group. This series is comprised of the apparatus for determining refractoriness under load (RUL) and creep in compression (CIC), the apparatus for testing hot modulus of rupture (HMOR).
- Blowing Agents in Insulation Materials (Foam)
- Cement / Gypsum
- Cement Raw Material
- Challenging Samples: A Solution to Monitor Curing
- Clay Brick
- Easy Determination of the Specific Heat Capacity of Glass Wool by Means of HFM Measurements
- Effect of Density on the Thermal Performance of a Glass Fiber Insulation Material
- EPS Foam Insulation
- Evaluating Product Delivery Characteristics from a Bottle, Tube or Spray Pack
- Evaluating Product Spreading Characteristics on Rotational Rheometer Using the Power Law Model
- Evaluating Product Thermal Stability by Temperature Cycling on a Rotational Rheometer
- Expandable Graphite – A Sustainable Solution for Flame Retardants in Plastics
- Floor Tiles
- Gypsum (Calcium Sulfate Dihydrate)
- How to Measure Rigid, Higher Thermal Conductivity Samples by Means of HFM
- How to Measure Viscosity Despite Sedimentation: The Paddle Stirrer
- Measurement on an Unstable, Viscous Liquid by Means of a Relative Geometry
- Paraffin PCM
- Polyester Resin on Mineral Wool
- Portland Cement
- Predicting the Stability of Dispersions with a Yield Stress
- Processing Non-Newtonian Products: Determining the Pressure Drop for a Power Law Fluid Along a Straight Ciruclar Pipe
- Rheological Properties of a Lubricating Grease in Accordance with DIN 51810-2
- Rheological Properties of Lubricating Grease in Accordance with DIN 51810-1
- TCC 918 – Avoiding Fire with Toxic Smoke Caused by Electronic Components
- TCC 918 – Improved Flame Retardants for Safe Cable and Wire Sheathing
- Thermal Characterization of Porous Concrete
- Time to Spec Up? Top Five Reasons to Replace a Viscometer with a Rheometer
- Using Squeeze Flow to Extend Rheological Measurements for Concentrated Suspensions