The simultaneous thermal analyzer NETZSCH STA 449 F3 Jupiter® allows the measurement of mass changes and thermal effects between -150°C and 2400°C.
The high flexibility caused by the various sensors, the great variety of sample crucibles and the wide TGA-measuring range make the system applicable for analysis of all kinds of materials including also inhomogenous substances. Easily interchangeable sample holders allow the optimal system adaption to the diverse application areas (TGA, TGA-DTA and TGA-DSC measurements). Various furnaces, easy interchangeable by the user, cover the complete temperature range (please see accessories).
Through to the vacuum tight design measurements at defined atmospheres (e.g. inert) are possible. The system is controlled by a newly developed integrated digital electronic device. The analysis of measuring data runs under a standard PC and the well-proven Windows® software.
Request a Quote
Heating and cooling rates:
0.001 K/min to 50 K/min
(dependent on furnace)
0,1 µg (over entire weighing range)
DSC resolution (depending on sensor type):
e.g. < 1 µW for DSC sensor type S and 0.5 µW for DSC sensor type E
inert, oxidizing, reducing, static, dynamic
for 2 purge gases and 1 protective gas
up to 10-4 mbar
FT-IR, MS via Capillary or SKIMMER coupling
- Deeper Insight Into the Pyrolysis of Acetylsalicylic Acid by Means of Thermogravimetry and GC-MS, Part 1
- Characterization of the Composition and Thermal Decomposition Profile of Recycled Carpet Samples by TGA-FT-IR, TGA-MS, and TGA-GC-MS
- Dental Alloys
- How To Detect Residual Caffeine in Decaffeinated Instant Coffee?
- Hydrogen Emission from Zircaloy BRC-276 under Water Vapor at Higher Temperatures
- Melting, Boiling and Vapor Pressure of 3 Polycyclic Aromatic Hydrocarbons
- Mouth-Nose-Protection Materials Under the Influence of Humidity
- STA Measurements with Steel Furnace