
applications
建築材料
熱分析や熱物性解析は、建築材料の総合的特性解析を可能にします。
組成、重量損失(例えば、バインダーのバーンアウトによる)、熱膨張、焼結、軟化点や熱伝導率に関する知見は、新材料の開発には極めて重要で、最終製品がそれらに課せられる要求に合致できることを保証する助けとなります。
同時熱分析(STA) は、改質ガラスのガラス転移温度、石膏やモルタルの相転移或いは熱分解挙動のような問題の解析に理想的な装置で、発生ガス分析(EGA) 用の装置にも接続することができます。
製造中或いは使用中の建築材料の膨張及び収縮挙動は、熱膨張測定によって解析することができます。
LFA や HFM は、小型及び大型試料の熱拡散率や熱伝導率を正確に解析する多目的の測定法です。
耐火材は、この材料グループ用に特別に設計された試験装置シリーズによって解析することができます。このシリーズは、荷重下の耐火性試験(RUL)や圧縮下のクリープ試験(CIC)装置、熱間破壊弾性率試験装置(HMOR)。
アプリケーション
- Blowing Agents in Insulation Materials (Foam)
- Cement
- Cement / Gypsum
- Cement Raw Material
- Challenging Samples: A Solution to Monitor Curing
- Clay Brick
- Easy Determination of the Specific Heat Capacity of Glass Wool by Means of HFM Measurements
- Effect of Density on the Thermal Performance of a Glass Fiber Insulation Material
- EPS Foam Insulation
- Evaluating Product Delivery Characteristics from a Bottle, Tube or Spray Pack
- Evaluating Product Spreading Characteristics on Rotational Rheometer Using the Power Law Model
- Evaluating Product Thermal Stability by Temperature Cycling on a Rotational Rheometer
- Expandable Graphite – A Sustainable Solution for Flame Retardants in Plastics
- Floor Tiles
- Glass
- Gypsum (Calcium Sulfate Dihydrate)
- How to Measure Rigid, Higher Thermal Conductivity Samples by Means of HFM
- How to Measure Viscosity Despite Sedimentation: The Paddle Stirrer
- Measurement on an Unstable, Viscous Liquid by Means of a Relative Geometry
- Paraffin PCM
- Polyester Resin on Mineral Wool
- Portland Cement
- Predicting the Stability of Dispersions with a Yield Stress
- Processing Non-Newtonian Products: Determining the Pressure Drop for a Power Law Fluid Along a Straight Ciruclar Pipe
- Rheological Properties of a Lubricating Grease in Accordance with DIN 51810-2
- Rheological Properties of Lubricating Grease in Accordance with DIN 51810-1
- TCC 918 – Avoiding Fire with Toxic Smoke Caused by Electronic Components
- TCC 918 – Improved Flame Retardants for Safe Cable and Wire Sheathing
- Thermal Characterization of Aerated Concrete by Means of LFA
- Thermal Characterization of Porous Concrete
- Time to Spec Up? Top Five Reasons to Replace a Viscometer with a Rheometer
- Using Squeeze Flow to Extend Rheological Measurements for Concentrated Suspensions
